Paper Bag Making Machine , 3 Ply/ 5 Ply Corrugated Board Making Machinery, Carton Folder Gluer, Corrugation Machine, UV Coating & Curing Machines, Laminating Machine , Flexo Printer Slotter Stacker, Wrapper Die Cutting Machine
For English Customers For Spanish Customers
Corrugated Board Making Machinery, Carton Folder Gluer, Corrugation Machine, UV Coating & Curing Machines, Laminating Machine
For French Customers For Portugues Customers
Home
Products
About Us
Contact Us
Feedback
Site Map

 

WRAPPER CUTTING MACHINE

 

This Machine has Six Sub Assemblies

 

  1. Body
  2. Die Head
  3. Hydraulic Pressing Unit
  4. Fixtures
  5. Electrical Control Unit
  6. Wrapper Collecting Channel And Scrap Bin

 

 

  1. BODY  :-  It is Fabricated & Normalised construction and quite strong to resist 10 ton pressing load. The Bottom most surface is inclined towards Die Head for easy diposal of wrappers.

 

  1. DIE HEAD  :-  This unit is fixed on left side of operator with an accurate centre location to ensure alignment with Hydraulic pressing unit. Besides this fine axial (Y & Z Axes) adjustment is also provided. The die is made of H.S.S, properly heat treated and ground to produce accurate shape and high productivity.

 

  1. HYDRAULIC PRESSING UNIT :- It consists of power pack, Hydraulic Cylinder, Flexible connections and pressure gauge. All the materials used are “Standard Make”. The power pack has a capacity of producing line pressure- 30 KG./CMSQ. And the speed-2 mtr./minute. Cylinder’s stroke can be adjusted between 150to 250 MM for different volume of cutting.

 

  1. FIXTURE  :- The Fixture body is a welded construction having a “VEE” section for holding the buffed for smooth movement of blanks. It is placed between die head and Hydraulic Pressing Unit.

 

  1. ELECTRIC CONTROL UNIT :- It Has Two Sections  :
    1. PANEL
    2. CONTROL BOX

 

  1. The Panel is placed at the bottom of R.H. side all item are of standard make.
  2. The Control Box is fixed on R.H. Side of operator. The movement od pressing cylinder starts after getting signal from L.S.-1 fixed on R.H. side. This LS- 1 is operated by closing the sliding the sliding guard unless and until L.S.- 1 is pressed the cycle can not be started. Three are two limit switches No. L.S.-2 & L.S.-3 for stroke adjustment of hydraulic cylinder. There is a micro switch at the end of wrapper collecting channel. This is for full safety and Ensures ‘No Movement” of hydraulic cylinder. The micro switch is pressed by over loaded wrappers and cutoff the cycle.

 
Friends Engineering Corporation
Friends Woodworking Machinery
Die Cutting Machine , Paper Bag Making Machine, Envelope Making Machine, Exercise Note Book Making Machinery, Printing, Binding, Paper Converting Machinery
Woodworking Machinery, Modular,Carpenter, Furniture & Bamboo Machines
  eXTReMe Tracker